 |
|
When it comes to Collision Replacement, you have many rights as a vehicle owner. You also have a chance to help the body shop, when it comes to replacing the Custom Graphics and or Accessories that you have installed on your vehicle. This would include letting them know where you purchased the items, or had them originally installed. But do keep in mind, with our recent economic conditions, many of the smaller installers and retailers have closed their doors. Beaver Stripes is still here, and can help locate these replacement parts that are needed to return your vehicle to pre-accident condition. So as a Consumer, concerned with getting your vehicle back the way you had it, you are more than welcome to mention our name as a source. We do work with many shops in Arizona, but a little mention from someone like you couldn't hurt, it could actually speed up the repair process.
As for the local Automotive Shops, as mentioned above, we will work with you on matching Graphics and Accessories that need to be replaced. However, many times at least one side of the vehicle may not match the other. For this we recommend to you and we are trying to explain to the Insurance companies as well, it is best to replace both sides, so they match. This is especially true when it comes to stainless steel trim, as there have been so many companies that gone by the wayside, matching their specs' would actually cost more than just replacing the entire set. As for Graphics, again it would be best to replace both sides. As weather, time and lack of maintenance will cause fading, cracking and burning of vinyl on a vehicle. With very little chance of matching color and or shading. This of course is up to the insured and the insurer to agree on, we understand, but it would be easier on you when you are ready to deliver the car, that everyone involved understands the above up front. We have had some success with the larger graphics lately, found on R-V's and trailers. This is where we would utilize our scanning and digital printing (as used on vehicle wraps) to match up only the needed replacement section. This process is only cost effective because of the size, it would not be cost effective for cars or trucks.
We will be expanding on this more in the near future, including photos of work we have done, so you may understand the process better.
|
 |
|
|
|
Ad
1b
|
|
|
|
|
|
 |
 |
 |
|
Copy Right 2009 MRW Enterprises, DBA Beaver Stripes. Classic Enterprises Web Creation.
|
|
|
Beaver Stripes, Molding, Custom Graphics and More! If it's Automotive Related in anyway, there is a good chance we would be willing to work with you!! Thanks!!
|
|
|
|
 |
 |
|
Vehicle Wraps, Pin-Striping, Rear Window Graphics, Magnetic Signs & Banners, In House Graphic Designers for your Graphic Needs. Semis, Trucks, Vans, Cars, Boats, RV's, Golf Carts, Bikes Business Graphics; Removable Wall Graphics, Window Graphics, Floor Graphics and Banners. .Store Fronts, Outdoor Signage, Race Cars, Sponsorships Stripe Kits, Mustang, Charger, Camaro, Challenger, Restoration or custom, Vehicle Wraps, Custom Graphics, Magnetic Signs, Window Graphics, commercial; vehicle lettering.
|
|
 |
 |
|
800-257-7835
|
 |
 |
|
602-269-8000
|
 |
|
|
|
Quick Links
|
|
Warranty
|
|
Generic Molding
|
|
Edge Molding
|
|
Wheel Well Trim
|
|
Vehicle Specific
|
|
Installation Tips
|
|
Other Vehicle Appearance Products Available
|
|
Why Buy A Wrap?
|
|
|
|
|
|
|
|
|